ClickHouse Backend

ClickHouse is a column-oriented database management system (DBMS) for online analytical processing of queries (OLAP), which supports best in the industry query performance, while significantly reducing storage requirements through its innovative use of columnar storage and compression. We port ClickHouse ( based on version 23.1 ) as a library, called ‘libch.so’, and Gluten loads this library through JNI as the native engine. In this way, we don’t need to deploy a standalone ClickHouse Cluster, Spark uses Gluten as SparkPlugin to read and write ClickHouse MergeTree data.

Architecture

The architecture of the ClickHouse backend is shown below:

ClickHouse-Backend-Architecture

  1. On Spark driver, Spark uses Gluten SparkPlugin to transform the physical plan to the Substrait plan, and then pass the Substrait plan to ClickHouse backend through JNI call on executors.
  2. Based on Spark DataSource V2 interface, implementing a ClickHouse Catalog to support operating the ClickHouse tables, and then using Delta to save some metadata about ClickHouse like the MergeTree parts information, and also provide ACID transactions.
  3. When querying from a ClickHouse table, it will fetch MergeTree parts information from Delta metadata and assign these parts into Spark partitions according to some strategies.
  4. When writing data into a ClickHouse table, it will use ClickHouse library to write MergeTree parts data and collect these MergeTree parts information after writing successfully, and then save these MergeTree parts information into Delta metadata. ( The feature of writing MergeTree parts is coming soon. )
  5. On Spark executors, each executor will load the ‘libch.so’ through JNI when starting, and then call the operators according to the Substrait plan which is passed from Spark Driver, like reading data from the MergeTree parts, writing the MergeTree parts, filtering data, aggregating data and so on.
  6. Currently, the ClickHouse backend only supports reading the MergeTree parts from local storage, it needs to use a high-performance shared file system to share a root bucket on every node of the cluster from the object storage, like JuiceFS.

Development environment setup

In general, we use IDEA for Gluten development and CLion for ClickHouse backend development on Ubuntu 20.

Prerequisites

Install the software required for compilation, run sudo ./ep/build-clickhouse/src/install_ubuntu.sh. Under the hood, it will install the following software:

  • Clang 16.0
  • cmake 3.20 or higher version
  • ninja-build 1.8.2

You can also refer to How-to-Build-ClickHouse-on-Linux. You need to install the following software manually:

  • Java 8
  • Maven 3.6.3 or higher version
  • Spark 3.2.2 or Spark 3.3.1

Then, get Gluten code:

    git clone https://github.com/oap-project/gluten.git

Setup ClickHouse backend development environment

If you don’t care about development environment, you can skip this part.

Otherwise, do:

  1. clone Kyligence/ClickHouse repo
     cd /to/some/place/
     git clone --recursive --shallow-submodules -b clickhouse_backend https://github.com/Kyligence/ClickHouse.git
    
  2. Configure cpp-ch ${GLUTEN_SOURCE}/cpp-ch can be treated as an add-on of Kyligence/Clickhouse

    First, initialize some configuration for this add-on:

     export GLUTEN_SOURCE=/path/to/gluten
     export CH_SOURCE_DIR=/path/to/ClickHouse
     cmake -G Ninja -S ${GLUTEN_SOURCE}/cpp-ch -B ${GLUTEN_SOURCE}/cpp-ch/build_ch -DCH_SOURCE_DIR=${CH_SOURCE_DIR} "-DCMAKE_C_COMPILER=$(command -v clang-16)" "-DCMAKE_CXX_COMPILER=$(command -v clang++-16)" "-DCMAKE_BUILD_TYPE=RelWithDebInfo"
    

    Next, you need to compile Kyligence/Clickhouse. There are two options:

  3. (Option 1) Use CLion

    • Open ClickHouse repo
    • Choose File -> Settings -> Build, Execution, Deployment -> Toolchains, and then choose Bundled CMake, clang-16 as C Compiler, clang++-16 as C++ Compiler:

      ClickHouse-CLion-Toolchains

    • Choose File -> Settings -> Build, Execution, Deployment -> CMake:

      ClickHouse-CLion-Toolchains

      And then add these options into CMake options:

        -DENABLE_PROTOBUF=ON -DENABLE_TESTS=OFF -DENABLE_JEMALLOC=ON -DENABLE_MULTITARGET_CODE=ON -DENABLE_EXTERN_LOCAL_ENGINE=ON
      
    • Build ‘ch’ target on ClickHouse Project with Debug mode or Release mode:

      ClickHouse-CLion-Toolchains

      If it builds with Release mode successfully, there is a library file called ‘libch.so’ in path ‘${CH_SOURCE_DIR}/cmake-build-release/utils/extern-local-engine/’.

      If it builds with Debug mode successfully, there is a library file called ‘libchd.so’ in path ‘${CH_SOURCE_DIR}/cmake-build-debug/utils/extern-local-engine/’.

  4. (Option 2) Use command line
     cmake --build ${GLUTEN_SOURCE}/cpp-ch/build_ch --target build_ch
    

    If it builds successfully, there is a library file called ‘libch.so’ in path ‘${GLUTEN_SOURCE}/cpp-ch/build/utils/extern-local-engine/’.

Directly Compile ClickHouse backend

In case you don’t want a develop environment, you can use the following command to compile ClickHouse backend directly:

git clone https://github.com/oap-project/gluten.git
cd gluten
bash ./ep/build-clickhouse/src/build_clickhouse.sh

This will download Clickhouse for you and build everything. The target file is /path/to/gluten/cpp-ch/build/utils/extern-local-engine/libch.so.

Compile Gluten

The prerequisites are the same as the one mentioned above. Compile Gluten with ClickHouse backend through maven:

  • for Spark 3.2.2
    git clone https://github.com/oap-project/gluten.git
    cd gluten/
    export MAVEN_OPTS="-Xmx8g -XX:ReservedCodeCacheSize=2g"
    mvn clean install -Pbackends-clickhouse -Phadoop-2.7.4 -Pspark-3.2 -Dhadoop.version=2.8.5 -DskipTests -Dcheckstyle.skip
    ls -al backends-clickhouse/target/gluten-XXXXX-spark-3.2-jar-with-dependencies.jar
  • for Spark 3.3.1
    git clone https://github.com/oap-project/gluten.git
    cd gluten/
    export MAVEN_OPTS="-Xmx8g -XX:ReservedCodeCacheSize=2g"
    mvn clean install -Pbackends-clickhouse -Phadoop-2.7.4 -Pspark-3.3 -Dhadoop.version=2.8.5 -DskipTests -Dcheckstyle.skip
    ls -al backends-clickhouse/target/gluten-XXXXX-spark-3.3-jar-with-dependencies.jar

Gluten in local Spark Thrift Server

Prepare working directory

  • for Spark 3.2.2
tar zxf spark-3.2.2-bin-hadoop2.7.tgz
cd spark-3.2.2-bin-hadoop2.7
rm -f jars/protobuf-java-2.5.0.jar
#download protobuf-java-3.23.4.jar, delta-core_2.12-2.0.1.jar and delta-storage-2.0.1.jar
wget https://repo1.maven.org/maven2/com/google/protobuf/protobuf-java/3.23.4/protobuf-java-3.23.4.jar -P ./jars
wget https://repo1.maven.org/maven2/io/delta/delta-core_2.12/2.0.1/delta-core_2.12-2.0.1.jar -P ./jars
wget https://repo1.maven.org/maven2/io/delta/delta-storage/2.0.1/delta-storage-2.0.1.jar -P ./jars
cp gluten-XXXXX-spark-3.2-jar-with-dependencies.jar jars/
  • for Spark 3.3.1
tar zxf spark-3.3.1-bin-hadoop2.7.tgz
cd spark-3.3.1-bin-hadoop2.7
rm -f jars/protobuf-java-2.5.0.jar
#download protobuf-java-3.23.4.jar, delta-core_2.12-2.2.0.jar and delta-storage-2.2.0.jar
wget https://repo1.maven.org/maven2/com/google/protobuf/protobuf-java/3.23.4/protobuf-java-3.23.4.jar -P ./jars
wget https://repo1.maven.org/maven2/io/delta/delta-core_2.12/2.2.0/delta-core_2.12-2.2.0.jar -P ./jars
wget https://repo1.maven.org/maven2/io/delta/delta-storage/2.2.0/delta-storage-2.2.0.jar -P ./jars
cp gluten-XXXXX-spark-3.3-jar-with-dependencies.jar jars/

Query local data

Start Spark Thriftserver on local
cd spark-3.2.2-bin-hadoop2.7
./sbin/start-thriftserver.sh \
  --master local[3] \
  --driver-memory 10g \
  --conf spark.serializer=org.apache.spark.serializer.JavaSerializer \
  --conf spark.sql.sources.ignoreDataLocality=true \
  --conf spark.default.parallelism=1 \
  --conf spark.sql.shuffle.partitions=1 \
  --conf spark.sql.files.minPartitionNum=1 \
  --conf spark.sql.files.maxPartitionBytes=1073741824 \
  --conf spark.sql.adaptive.enabled=false \
  --conf spark.locality.wait=0 \
  --conf spark.locality.wait.node=0 \
  --conf spark.locality.wait.process=0 \
  --conf spark.sql.columnVector.offheap.enabled=true \
  --conf spark.memory.offHeap.enabled=true \
  --conf spark.memory.offHeap.size=6442450944 \
  --conf spark.plugins=io.glutenproject.GlutenPlugin \
  --conf spark.gluten.sql.columnar.columnarToRow=true \
  --conf spark.executorEnv.LD_PRELOAD=/path_to_clickhouse_library/libch.so\
  --conf spark.gluten.sql.columnar.libpath=/path_to_clickhouse_library/libch.so \
  --conf spark.gluten.sql.columnar.iterator=true \
  --conf spark.gluten.sql.columnar.loadarrow=false \
  --conf spark.gluten.sql.columnar.hashagg.enablefinal=true \
  --conf spark.gluten.sql.enable.native.validation=false \
  --conf spark.io.compression.codec=snappy \
  --conf spark.gluten.sql.columnar.forceShuffledHashJoin=true \
  --conf spark.sql.catalog.spark_catalog=org.apache.spark.sql.execution.datasources.v2.clickhouse.ClickHouseSparkCatalog \
  --conf spark.databricks.delta.maxSnapshotLineageLength=20 \
  --conf spark.databricks.delta.snapshotPartitions=1 \
  --conf spark.databricks.delta.properties.defaults.checkpointInterval=5 \
  --conf spark.databricks.delta.stalenessLimit=3600000

#connect to Spark Thriftserver by beeline
bin/beeline -u jdbc:hive2://localhost:10000/ -n root
Query local MergeTree files
  • Prepare data

Currently, the feature of writing ClickHouse MergeTree parts by Spark is developing, so you need to use command ‘clickhouse-local’ to generate MergeTree parts data manually. We provide a python script to call the command ‘clickhouse-local’ to convert parquet data to MergeTree parts:


#install ClickHouse community version
sudo apt-get install -y apt-transport-https ca-certificates dirmngr
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 8919F6BD2B48D754
echo "deb https://packages.clickhouse.com/deb stable main" | sudo tee /etc/apt/sources.list.d/clickhouse.list
sudo apt-get update
sudo apt install -y --allow-downgrades clickhouse-server=22.5.1.2079 clickhouse-client=22.5.1.2079 clickhouse-common-static=22.5.1.2079

#generate MergeTree parts
mkdir -p /path_clickhouse_database/table_path/
python3 /path_to_clickhouse_backend_src/utils/local-engine/tool/parquet_to_mergetree.py --path=/tmp --source=/path_to_parquet_data/tpch-data-sf100/lineitem --dst=/path_clickhouse_database/table_path/lineitem

This python script will convert one parquet data file to one MergeTree parts.

  • Create a TPC-H lineitem table using ClickHouse DataSource
    DROP TABLE IF EXISTS lineitem;
    CREATE TABLE IF NOT EXISTS lineitem (
     l_orderkey      bigint,
     l_partkey       bigint,
     l_suppkey       bigint,
     l_linenumber    bigint,
     l_quantity      double,
     l_extendedprice double,
     l_discount      double,
     l_tax           double,
     l_returnflag    string,
     l_linestatus    string,
     l_shipdate      date,
     l_commitdate    date,
     l_receiptdate   date,
     l_shipinstruct  string,
     l_shipmode      string,
     l_comment       string)
     USING clickhouse
     TBLPROPERTIES (engine='MergeTree'
                    )
     LOCATION '/path_clickhouse_database/table_path/lineitem';
  • TPC-H Q6 test
    SELECT
        sum(l_extendedprice * l_discount) AS revenue
    FROM
        lineitem
    WHERE
        l_shipdate >= date'1994-01-01'
        AND l_shipdate < date'1994-01-01' + interval 1 year
        AND l_discount BETWEEN 0.06 - 0.01 AND 0.06 + 0.01
        AND l_quantity < 24;
  • Result

    The DAG is shown on Spark UI as below:

    ClickHouse-CLion-Toolchains

Query local Parquet files

You can query local parquet files directly.

-- query on a single file
select * from parquet.`/your_data_root_dir/1.parquet`;

-- query on a directly which has multiple files
select * from parquet.`/your_data_roo_dir/`;

You can also create a TEMPORARY VIEW for parquet files.

create or replace temporary view your_table_name
using org.apache.spark.sql.parquet
options(
    path "/your_data_root_dir/"
)
Query Parquet files in S3

If you have parquet files in S3(either AWS S3 or S3 compatible storages like MINIO), you can query them directly. You need to add these additional configs to spark:

  --config spark.hadoop.fs.s3a.endpoint=S3_ENDPOINT
  --config spark.hadoop.fs.s3a.path.style.access=true
  --config spark.hadoop.fs.s3a.access.key=YOUR_ACCESS_KEY
  --config spark.hadoop.fs.s3a.secret.key=YOUR_SECRET_KEY

where S3_ENDPOINT must follow the format of https://s3.region-code.amazonaws.com, e.g. https://s3.us-east-1.amazonaws.com (or `http://hostname:39090 for MINIO)

When you query the parquet files in S3, you need to add the prefix s3a:// to the path, e.g. s3a://your_bucket_name/path_to_your_parquet.

Additionally, you can add these configs to enable local caching of S3 data. Each spark executor will have its own cache. Cache stealing between executors is not supported yet.

  --config spark.gluten.sql.columnar.backend.ch.runtime_config.s3.local_cache.enabled=true
  --config spark.gluten.sql.columnar.backend.ch.runtime_config.s3.local_cache.cache_path=/executor_local_folder_for_cache
Use beeline to execute queries

After start a spark thriftserver, we can use the beeline to connect to this server.

# run a file
/path_to_spark/bin/beeline -u jdbc:hive2://localhost:10000 -f <your_sql_file>

# run a query
/path_to_spark/bin/beeline -u jdbc:hive2://localhost:10000 -e '<your_sql>'

# enter a interactive mode
/path_to_spark/bin/beeline -u jdbc:hive2://localhost:10000

Query Hive tables in HDFS

Suppose that you have set up hive and hdfs, you can query the data on hive directly.

  • Copy hive-site.xml into /path_to_spark/conf/
  • Copy hdfs-site.xml into /path_to_spark/conf/, and edit spark-env.sh
# add this line into spark-env.sh
export HADOOP_CONF_DIR=/path_to_spark/conf
  • Start spark thriftserver with hdfs configurations
hdfs_conf_file=/your_local_path/hdfs-site.xml

cd spark-3.2.2-bin-hadoop2.7
# add a new option: spark.gluten.sql.columnar.backend.ch.runtime_config.hdfs.libhdfs3_conf
./sbin/start-thriftserver.sh \
  --master local[3] \
  --files $hdfs_conf_file \
  --driver-memory 10g \
  --conf spark.serializer=org.apache.spark.serializer.JavaSerializer \
  --conf spark.sql.sources.ignoreDataLocality=true \
  --conf spark.default.parallelism=1 \
  --conf spark.sql.shuffle.partitions=1 \
  --conf spark.sql.files.minPartitionNum=1 \
  --conf spark.sql.files.maxPartitionBytes=1073741824 \
  --conf spark.locality.wait=0 \
  --conf spark.locality.wait.node=0 \
  --conf spark.locality.wait.process=0 \
  --conf spark.sql.columnVector.offheap.enabled=true \
  --conf spark.memory.offHeap.enabled=true \
  --conf spark.memory.offHeap.size=6442450944 \
  --conf spark.plugins=io.glutenproject.GlutenPlugin \
  --conf spark.gluten.sql.columnar.columnarToRow=true \
  --conf spark.executorEnv.LD_PRELOAD=/path_to_clickhouse_library/libch.so\
  --conf spark.gluten.sql.columnar.libpath=/path_to_clickhouse_library/libch.so \
  --conf spark.gluten.sql.columnar.iterator=true \
  --conf spark.gluten.sql.columnar.loadarrow=false \
  --conf spark.gluten.sql.columnar.hashagg.enablefinal=true \
  --conf spark.gluten.sql.enable.native.validation=false \
  --conf spark.io.compression.codec=snappy \
  --conf spark.gluten.sql.columnar.forceShuffledHashJoin=true \
  --conf spark.sql.catalog.spark_catalog=org.apache.spark.sql.execution.datasources.v2.clickhouse.ClickHouseSparkCatalog \
  --conf spark.databricks.delta.maxSnapshotLineageLength=20 \
  --conf spark.databricks.delta.snapshotPartitions=1 \
  --conf spark.databricks.delta.properties.defaults.checkpointInterval=5 \
  --conf spark.databricks.delta.stalenessLimit=3600000 \
  --conf spark.gluten.sql.columnar.backend.ch.runtime_config.hdfs.libhdfs3_conf=./hdfs-site.xml

For example, you have a table demo_database.demo_table on the hive, you can run queries as below.

select * from demo_database.demo_talbe;

Gluten in YARN cluster

We can to run a Spark SQL task by gluten on a yarn cluster as following

#!/bin/bash

# The file contains the sql you want to run
sql_file=/path/to/spark/sql/file

export SPARK_HOME=/path/to/spark/home
spark_cmd=$SPARK_HOME/bin/spark-sql

# Define the path to libch.so
ch_lib=/path/to/libch.so
export LD_PRELOAD=$ch_lib

# copy gluten jar file to $SPARK_HOME/jar
gluten_jar=/path/to/gluten/jar/file
cp $gluten_jar $SPARK_HOME/jar

batchsize=20480
hdfs_conf=/path/to/hdfs-site.xml

$spark_cmd \
  --name gluten_on_yarn
  --master yarn \
  --deploy-mode client \
  --files $ch_lib \
  --executor-cores 1 \
  --num-executors 2 \
  --executor-memory 10g \
  --conf spark.default.parallelism=4 \
  --conf spark.memory.offHeap.enabled=true \
  --conf spark.memory.offHeap.size=7g \
  --conf spark.driver.maxResultSize=2g \
  --conf spark.sql.autoBroadcastJoinThreshold=-1 \
  --conf spark.sql.parquet.columnarReaderBatchSize=${batchsize} \
  --conf spark.sql.inMemoryColumnarStorage.batchSize=${batchsize} \
  --conf spark.sql.execution.arrow.maxRecordsPerBatch=${batchsize} \
  --conf spark.sql.broadcastTimeout=4800 \
  --conf spark.task.maxFailures=1 \
  --conf spark.excludeOnFailure.enabled=false \
  --conf spark.driver.maxResultSize=4g \
  --conf spark.sql.adaptive.enabled=false \
  --conf spark.dynamicAllocation.executorIdleTimeout=0s \
  --conf spark.sql.shuffle.partitions=112 \
  --conf spark.sql.sources.useV1SourceList=avro \
  --conf spark.sql.files.maxPartitionBytes=1073741824 \
  --conf spark.gluten.sql.columnar.columnartorow=true \
  --conf spark.gluten.sql.columnar.loadnative=true \
  --conf spark.gluten.sql.columnar.libpath=$ch_lib \
  --conf spark.gluten.sql.columnar.iterator=true \
  --conf spark.gluten.sql.columnar.loadarrow=false \
  --conf spark.gluten.sql.columnar.hashagg.enablefinal=true \
  --conf spark.gluten.sql.enable.native.validation=false \
  --conf spark.gluten.sql.columnar.forceShuffledHashJoin=true \
  --conf spark.gluten.sql.columnar.backend.ch.runtime_config.hdfs.libhdfs3_conf=$hdfs_conf \
  --conf spark.gluten.sql.columnar.backend.ch.runtime_config.logger.level=debug \
  --conf spark.plugins=io.glutenproject.GlutenPlugin \
  --conf spark.executorEnv.LD_PRELOAD=$LD_PRELOAD \
  --conf spark.hadoop.input.connect.timeout=600000 \
  --conf spark.hadoop.input.read.timeout=600000 \
  --conf spark.hadoop.input.write.timeout=600000 \
  --conf spark.hadoop.dfs.client.log.severity="DEBUG2" \
  --files $ch_lib \
  -f $sql_file

We also can use spark-submit to run a task.

Benchmark with TPC-H 100 Q6 on Gluten with ClickHouse backend

This benchmark is tested on AWS EC2 cluster, there are 7 EC2 instances:

Node Role EC2 Type Instances Count Resources AMI
Master m5.4xlarge 1 16 cores 64G memory per node ubuntu-focal-20.04
Worker m5.4xlarge 1 16 cores 64G memory per node ubuntu-focal-20.04

Deploy on Cloud

  • Tested on Spark Standalone cluster, its resources are shown below:

      CPU cores Memory Instances Count
    Spark Worker 15 60G 6
  • Prepare jars

    Refer to Deploy Spark 3.2.2

  • Deploy gluten-core-XXXXX-jar-with-dependencies.jar

    #deploy 'gluten-core-XXXXX-jar-with-dependencies.jar' to every node, and then
    cp gluten-core-XXXXX-jar-with-dependencies.jar /path_to_spark/jars/
  • Deploy ClickHouse library

    Deploy ClickHouse library ‘libch.so’ to every worker node.

Deploy JuiceFS
  • JuiceFS uses Redis to save metadata, install redis firstly:
    wget https://download.redis.io/releases/redis-6.0.14.tar.gz
    sudo apt install build-essential
    tar -zxvf redis-6.0.14.tar.gz
    cd redis-6.0.14
    make
    make install PREFIX=/home/ubuntu/redis6
    cd ..
    rm -rf redis-6.0.14

    #start redis server
    /home/ubuntu/redis6/bin/redis-server /home/ubuntu/redis6/redis.conf

    wget https://github.com/juicedata/juicefs/releases/download/v0.17.5/juicefs-0.17.5-linux-amd64.tar.gz
    tar -zxvf juicefs-0.17.5-linux-amd64.tar.gz

    ./juicefs format --block-size 4096 --storage s3 --bucket https://s3.cn-northwest-1.amazonaws.com.cn/s3-gluten-tpch100/ --access-key "XXXXXXXX" --secret-key "XXXXXXXX" redis://:123456@master-ip:6379/1 gluten-tables

    #mount a volumn on every node
    ./juicefs mount -d --no-usage-report --no-syslog --attr-cache 7200 --entry-cache 7200 --dir-entry-cache 7200 --buffer-size 500 --prefetch 1 --open-cache 86400 --log /home/ubuntu/juicefs-logs/mount1.log --cache-dir /home/ubuntu/juicefs-cache/ --cache-size 102400 redis://:123456@master-ip:6379/1 /home/ubuntu/gluten/gluten_table
    #create a directory for lineitem table path
    mkdir -p /home/ubuntu/gluten/gluten_table/lineitem

Preparation

Please refer to Data-preparation to generate MergeTree parts data to the lineitem table path: /home/ubuntu/gluten/gluten_table/lineitem.

Run Spark Thriftserver

cd spark-3.2.2-bin-hadoop2.7
./sbin/start-thriftserver.sh \
  --master spark://master-ip:7070 --deploy-mode client \
  --driver-memory 16g --driver-cores 4 \
  --total-executor-cores 90 --executor-memory 60g --executor-cores 15 \
  --conf spark.driver.memoryOverhead=8G \
  --conf spark.default.parallelism=90 \
  --conf spark.sql.shuffle.partitions=1 \
  --conf spark.sql.files.minPartitionNum=1 \
  --conf spark.sql.files.maxPartitionBytes=536870912 \
  --conf spark.sql.parquet.filterPushdown=true \
  --conf spark.sql.parquet.enableVectorizedReader=true \
  --conf spark.locality.wait=0 \
  --conf spark.locality.wait.node=0 \
  --conf spark.locality.wait.process=0 \
  --conf spark.sql.columnVector.offheap.enabled=true \
  --conf spark.memory.offHeap.enabled=true \
  --conf spark.memory.offHeap.size=42949672960 \
  --conf spark.serializer=org.apache.spark.serializer.JavaSerializer \
  --conf spark.sql.sources.ignoreDataLocality=true \
  --conf spark.plugins=io.glutenproject.GlutenPlugin \
  --conf spark.gluten.sql.columnar.columnarToRow=true \
  --conf spark.gluten.sql.columnar.libpath=/path_to_clickhouse_library/libch.so \
  --conf spark.gluten.sql.columnar.iterator=true \
  --conf spark.gluten.sql.columnar.loadarrow=false \
  --conf spark.gluten.sql.columnar.hashagg.enablefinal=true \
  --conf spark.gluten.sql.enable.native.validation=false \
  --conf spark.io.compression.codec=snappy \
  --conf spark.gluten.sql.columnar.forceShuffledHashJoin=true \
  --conf spark.sql.catalog.spark_catalog=org.apache.spark.sql.execution.datasources.v2.clickhouse.ClickHouseSparkCatalog \
  --conf spark.databricks.delta.maxSnapshotLineageLength=20 \
  --conf spark.databricks.delta.snapshotPartitions=1 \
  --conf spark.databricks.delta.properties.defaults.checkpointInterval=5 \
  --conf spark.databricks.delta.stalenessLimit=3600000

Test TPC-H Q6 with JMeter

  • Create a lineitem table using clickhouse datasource
    DROP TABLE IF EXISTS lineitem;
    CREATE TABLE IF NOT EXISTS lineitem (
     l_orderkey      bigint,
     l_partkey       bigint,
     l_suppkey       bigint,
     l_linenumber    bigint,
     l_quantity      double,
     l_extendedprice double,
     l_discount      double,
     l_tax           double,
     l_returnflag    string,
     l_linestatus    string,
     l_shipdate      date,
     l_commitdate    date,
     l_receiptdate   date,
     l_shipinstruct  string,
     l_shipmode      string,
     l_comment       string)
     USING clickhouse
     TBLPROPERTIES (engine='MergeTree'
                    )
     LOCATION 'file:///home/ubuntu/gluten/gluten_table/lineitem';
  • Run TPC-H Q6 test with JMeter
    1. Run TPC-H Q6 test 100 times in the first round;
    2. Run TPC-H Q6 test 1000 times in the second round;

Performance

The performance of Gluten + ClickHouse backend increases by about 1/3.

  70% 80% 90% 99% Avg
Spark + Parquet 590ms 592ms 597ms 609ms 588ms
Spark + Gluten + ClickHouse backend 402ms 405ms 409ms 425ms 399ms

New CI System

https://opencicd.kyligence.com/job/Gluten/job/gluten-ci/ public read-only account:gluten/hN2xX3uQ4m

Celeborn support

Gluten with clickhouse backend has not yet supportted Celeborn natively as remote shuffle service using columar shuffle. However, you can still use Celeborn with row shuffle, which means a ColumarBatch will be converted to a row during shuffle. Below introduction is used to enable this feature:

First refer to this URL(https://github.com/apache/incubator-celeborn) to setup a celeborn cluster.

Then add the Spark Celeborn Client packages to your Spark application’s classpath(usually add them into $SPARK_HOME/jars).

  • Celeborn: celeborn-client-spark-3-shaded_2.12-0.3.0-incubating.jar

Currently to use Celeborn following configurations are required in spark-defaults.conf

spark.shuffle.manager org.apache.spark.shuffle.celeborn.SparkShuffleManager

# celeborn master
spark.celeborn.master.endpoints clb-master:9097

spark.shuffle.service.enabled false

# options: hash, sort
# Hash shuffle writer use (partition count) * (celeborn.push.buffer.max.size) * (spark.executor.cores) memory.
# Sort shuffle writer uses less memory than hash shuffle writer, if your shuffle partition count is large, try to use sort hash writer.
spark.celeborn.client.spark.shuffle.writer hash

# We recommend setting spark.celeborn.client.push.replicate.enabled to true to enable server-side data replication
# If you have only one worker, this setting must be false 
# If your Celeborn is using HDFS, it's recommended to set this setting to false
spark.celeborn.client.push.replicate.enabled true

# Support for Spark AQE only tested under Spark 3
# we recommend setting localShuffleReader to false to get better performance of Celeborn
spark.sql.adaptive.localShuffleReader.enabled false

# If Celeborn is using HDFS
spark.celeborn.storage.hdfs.dir hdfs://<namenode>/celeborn

# If you want to use dynamic resource allocation,
# please refer to this URL (https://github.com/apache/incubator-celeborn/tree/main/assets/spark-patch) to apply the patch into your own Spark.
spark.dynamicAllocation.enabled false

Celeborn Columnar Shuffle Support

The native Celeborn support can be enabled by the following configuration

spark.shuffle.manager=org.apache.spark.shuffle.gluten.celeborn.CelebornShuffleManager

quickly start a celeborn cluster

wget https://dlcdn.apache.org/incubator/celeborn/celeborn-0.3.0-incubating/apache-celeborn-0.3.0-incubating-bin.tgz && \
tar -zxvf apache-celeborn-0.3.0-incubating-bin.tgz && \
mv apache-celeborn-0.3.0-incubating-bin/conf/celeborn-defaults.conf.template apache-celeborn-0.3.0-incubating-bin/conf/celeborn-defaults.conf && \
mv apache-celeborn-0.3.0-incubating-bin/conf/log4j2.xml.template apache-celeborn-0.3.0-incubating-bin/conf/log4j2.xml && \
mkdir /opt/hadoop && chmod 777 /opt/hadoop && \
echo -e "celeborn.worker.flusher.threads 4\nceleborn.worker.storage.dirs /tmp\nceleborn.worker.monitor.disk.enabled false" > apache-celeborn-0.3.0-incubating-bin/conf/celeborn-defaults.conf && \
bash apache-celeborn-0.3.0-incubating-bin/sbin/start-master.sh && bash apache-celeborn-0.3.0-incubating-bin/sbin/start-worker.sh

Columnar shuffle mode

We have two modes of columnar shuffle

  1. prefer cache
  2. prefer spill

Switch through the configuration spark.gluten.sql.columnar.backend.ch.shuffle.preferSpill, the default is false, enable prefer cache shuffle.

In the prefer cache mode, as much memory as possible will be used to cache the shuffle data. When the memory is insufficient, spark will actively trigger the memory spill. You can also specify the threshold size through spark.gluten.sql.columnar.backend.ch.spillThreshold to Limit memory usage. The default value is 0MB, which means no limit on memory usage.


Back to top

Copyright © 2024 The Apache Software Foundation, Licensed under the Apache License, Version 2.0. Apache Gluten, Gluten, Apache, the Apache feather logo, and the Apache Gluten project logo are either registered trademarks or trademarks of the Apache Software Foundation in the United States and/or other countries.

Apache Gluten is an effort undergoing incubation at The Apache Software Foundation (ASF), sponsored by the Apache Incubator. Incubation is required of all newly accepted projects until a further review indicates that the infrastructure, communications, and decision making process have stabilized in a manner consistent with other successful ASF projects. While incubation status is not necessarily a reflection of the completeness or stability of the code, it does indicate that the project has yet to be fully endorsed by the ASF.

Privacy Policy